Programmable Controller – Shimaden FP23 Series

Features

  • 2-channel controller (Basic type: 1-channel controller)
  • Independent 2-loop / 2-input operation control
  • High accuracy ± (0.1% FS + 1 digit)
  • High Sampling Cycle 0.1 sec.
  • High resolution 1/ 1000 °C display achieved
    *Only for R.T.D. input (scale: 0.000~30.000 °C)
  • Programmable Max. 400 steps (400 steps x 1 pattern to 20 steps x 20 patterns)
  • Auto-Tuning PID / Expert PID
  • Max. 10 Zone PID control available
  • Independent Universal-Input
  • User Friendly Operation (Menu Driven: 4 Lines LCD Display)
  • Easy Setting & Maintenance via Infrared COM port on the front panel
  • Interface RS-232C/RS-485 (MODBUS / Shimaden)
  • The front dust/splash-proof IP66
  • Universal Power Supply (100~240V AC ±10%)
  • Sensor power supply
Enquiry

FP23 Series is programmable controller capable of high resolution 1/1000℃ display (RTD 0.000–30.000 ℃) which is suitable for high precision process.

Ordering Information

ITEM CODE Specifications
SERIES FP23- 96 × 96 DIN size, high-performance programmable controller
BASIC FUNCTIONS SS Universal-input, 1-input/1-output control, 3 event outputs
CONTROL
OUTPUT 1
Y Contact 1c, contact rating: 240V AC 2.5A/resistive load, 1A/inductive load
I Current 4 ~ 20mA DC, Load resistance: max. 600Ω
P SSR drive voltage output 12V±1.5V DC, Load current: max. 30mA
V Voltage 0 ~ 10V DC, Load current: max. 2mA
CONTROL OUTPUT 2 N- None
HEATER BREAK ALARM
(FOR SINGLE-PHASE)
00 None
31 Heater break alarm*
(heater current 30A with CT)
* Selectable only when
Control Output 1 is Y or P
32 Heater break alarm*
(heater current 50A with CT)
ANALOG OUTPUT 1 0 None
3 0 ~ 10mV DC, Output resistance: 10Ω
4 4 ~ 20mA DC, Load resistance: max. 300Ω
6 0 ~ 10V DC, Load current: max. 2mA
ANALOG OUTPUT 2/
SENSOR POWER SUPPLY
0 None
3 0 ~ 10mV DC, Output resistance: 10Ω
4 4 ~ 20mA DC, Load resistance: max. 300Ω
6 0 ~ 10V DC, Load current: max. 2mA
8 Sensor power supply 24V DC 25mA
EXTERNAL INPUT/ Standard 0 DI 4 points, DO 5 points (start pattern No. switching not available)
OUTPUT CONTROL SIGNAL
(DI/DO) *1
1 DI 10 points, DO 9 points (start pattern No. switching available)
2 DI 10 points, DO 13 points (start pattern No. switching available)
COMMUNICATION FUNCTION 0 None
5 RS-485 Shimaden standard protocol / MODBUS (RTU/ASCII) communication protocol
7 RS-232C
REMARKS A Without
9 With

*1 When switching the start pattern No. by DI, 10 points of DI (CODE 1 or 2) are required.

Optional Accessories
Name Model Description
Infra-red Communication Adapter S5004 USB connector cable (2m), Setup Software (CD-ROM)
Shunt Resistor QCS002 250Ω ±0.1%, external input resistance at current input
Relay Unit AP2MC Converts open collector output to contact output. 2 circuits built-in

 

Download

Shimaden FP23 Series Programmable Controller-Dpstargroup

Reviews

There are no reviews yet.

Be the first to review “Programmable Controller – Shimaden FP23 Series”

Your email address will not be published. Required fields are marked *