Constant Power Heating Cables For Gutters – Flexelec FTC

Features

  • Hard-wearing and flexible.
  • Can be cut to length on site.
  • Extremely simple termination.
  • Cold tail incorporated: no extra connection necessary
  • Available as 30 or 40 W/m.
  • Power supply: 230 V.
  • Copper braid and PVC outer sheath to protect against UV rays.
Enquiry

Constant Wattage Heating Cables

Heat tracing applications are plentiful and various. Dpstar provides adapted solutions to heating cables used in various sectors such as construction, building, industry, and even the private sector. We offer you our experience of more than 30 years in supply and design of heating cables, heating tapes, heating cords with a complete range of accessories FLEXKIT. Dpstar provides serial heating cables, self-regulating heating cables, constant wattage heating cables, and many other heating elements to answer your needs. We understand your requirements and we are specialists in Electrical Heat Tracing solutions and provide reliable systems and solutions. Dpstar is responsible, trustworthy, and accountable you can count on.

The FTC is a constant power cable designed to protect drainpipes and gutters against freezing. It also guards against the consequences of two phenomena that occur in winter:

  • Gutters obstructed by snowfalls: when snow on the roof melts, water cannot drain away properly and may infiltrate the facades of the building.
  • Icicles hanging from gutters can be dangerous when they fall off. Placed in the bottom of gutters and in drainpipes, the cable maintains a drainage channel for the water and prevents ice from forming.

To ensure that these heating elements enjoy a long service life, we recommend using a control device.

Installation

There are two ways of fitting the cable in the gutter or drainpipe:

  • Thoroughly degrease and dry the support and lay the cable, covering it completely with FTAL aluminium adhesive tape.
  • Glue the cable into the bottom of the gutter every meter or so using SILT 100 silicon adhesive. In drainpipes, hold the cable in place with an FX/CRT hook.
  • Controlling the installation with an FX/CDM2 or FX/CDM3 hygrothermostat will lead to significant energy savings.

Characteristics

  • Hard-wearing and flexible.
  • Can be cut to length on site.
  • Extremely simple termination.
  • Cold tail incorporated: no extra connection necessary.
  • Available as 30 and 40 W/m.
  • Power supply 230 V.
  • Copper braid and thermoplastic outer sheath to protect against UV rays.
  • Special production on request.

Applications

  • Secure the maintenance equipment of skating rings with heating cable.
  • Stop snow and ice in gutters with heating cables.

Specification

Model FTC
Heating wire Nickel-Copper or Nickel-Chrome
Dimensions 8 x 11 mm
Power 30 or 40 W/m
Permissible surface temperature From – 30°C to + 90°C
Max. circuit length 120 m in 30 W/m – 100 m in 40 W/m
Distance between 2
consecutive contact points
700 mm
Ingress protection code IP54 with our kits
Min. bending radius 6 x the thickness of the cable

Reviews

There are no reviews yet.

Be the first to review “Constant Power Heating Cables For Gutters – Flexelec FTC”

Your email address will not be published. Required fields are marked *