ACI Thermistor Duct Without Box

Features

  • Stainless steel probe with two 22 AWG Etched Teflon colored lead wires to differentiate the different sensor types.
  • Designed to be used in smaller duct applications and includes an insulation pad for sealing your duct as well as to dampen vibration.
  • The Duct without Box Series can be ordered with optional plenum rated cables and NIST Certificates.
Enquiry
Category:
Love0

Automation Components, Inc. (ACI) creates, manufactures, and distributes building automation sensors for the heating, ventilation, and air conditioning (HVAC) Industry. Dpstar is ACI Authorised Distributor in Malaysia. Our product lines include Temperature Sensors, Relative Humidity Sensors, Current Sensors, Pressure Sensors, Gas Sensors, and Wireless Sensors.

The ACI Thermistor Duct without Box Series features a stainless steel probe with two 22 AWG Etched Teflon colored lead wires to differentiate the different sensor types. The sensors in this series are manufactured using ACI’s proven double encapsulation process to eliminate the effects of moisture upon the sensors and increased response times using our high quality, thermally conductive epoxy. The duct style sensor is designed to be used in smaller duct applications and includes an insulation pad for sealing your duct as well as to dampen vibration. For best results, the sensor length should be determined by the actual width or diameter of your duct such that the tip of the probe is in the approximate center of the duct. On larger ducts, you may want to refer to our Rigid or Bendable Copper Averaging sensor for increased sensing points and better temperature control. The Duct without Box Series can be ordered with optional plenum rated cables and NIST Certificates.

Dimension

Applications

  • Roof Top Units
  • Air Handlers
  • Monitoring Supply/Discharge/Return/Mixed Air Temperatures

The ACI Thermistor Bullet Probe Series is covered by ACI’s Five (5) Year Limited Warranty.

Specification

Sensor Type | Sensor Curve Thermistor | Non-Linear, NTC (Negative Temperature Coe cient)
Number Sensing Points | Number Wires One | Two (Non-Polarity Sensitive)
Sensor Output @ 25ºC (77ºF) | (Lead Wire Colors) A/1.8K: 1.8KΩ nominal | (Red/Yellow)
A/3K: 3KΩ nominal | (White/Brown)
A/AN (Type III): 10KΩ nominal | (White/White)
A/AN-BC: 5.238KΩ nominal | (White/Yellow)
A/CP (Type II): 10KΩ nominal | (White/Green)
A/CSI: 10KΩ nominal | (Green/Yellow)
A/10KS: 10KΩ nominal | (White/Blue)
A/10K-E1: 10KΩ nominal | (Gray/Orange)
A/20K: 20KΩ nominal | (Brown/Blue)
A/50K: 50KΩ nominal | (Brown/Yellow)
A/100KS: 100KΩ nominal | (Black/Yellow)
Accuracy 0-70ºC (32-158ºF +/-0.2ºC (+/-0.36ºF) except A/10K-E1 Series: +/- 0.3ºC (+/-0.54ºF)
A/1.8K Series: +/- 0.5ºC @ 25ºC (77ºF) and (+/-1.0ºC) (+/-1.8ºF)
Stability Sensor Dependent; Contact ACI for more information on the sensor in question.
Response Time (63% Step Change) 10 Seconds nominal
Power Dissipation Constant 3 mW/ºC except A/1.8K Series: 1 mW/ºC | A/10K-E1 Series: 2 mW/ºC
Operating | Storage Temperature Range -40 to 115ºC (-40 to 239ºF) | -40 to 85ºC (-40 to 185ºF)
Operating Humidity Range 10 to 95% RH, non-condensing
Probe Material | Flange Material 304 Stainless Steel | Galvanized Steel
Fitting Material | Flammability Rating Polyamide 66 (High Performance Nylon) | UL94-HB
Foam Pad Material | Flammability Rating Neoprene/EPDM/SBR Polymer | UL94-HBF; FMVSS-302; MIL-R-6130C
Product Weight See table on back of Product Data sheet
Agency Approvals CE, RoHS2, WEEE
Standard Wire Lead Wire Insulation | Wire Rating: Etched Te on (PTFE) Colored Leads | MIL-W-16878/4 (Type E)
Temperature Rating: -55ºC (-67ºF) to 200ºC (392ºF)
Conductor Material:Silver Plated Copper
Rated Applications:Suitable for Indoor and Outdoor(wet) location. Oil, Moisture, Acids, Oils, and Moisture Resistant
Plenum Wire Lead Wire Insulation | Wire Rating:
CL2P: FEP (Fluorinated Ethylene Propylene) | TYPE CL2P – TYPE CMP 22 AWG (UL), C(UL) FEP/FEP E130356 ROHS
CMP: Low Smoke PVC (Poly Vinyl Chloride) | NEC Article 800; UL Listed C(UL)US CMP
Temperature Rating: CL2P: -80ºC (-112ºF) to 150ºC (302ºF)
Conductor Material: CMP: 0ºC (32ºF) to 75ºC (167ºF)
Rated Applications:
CL2P: Suitable for Indoor and Outdoor(wet) location. Oil, Gas, Sunlight, Abrasion Acid Resistant
CMP: Suitable for Indoor use only. Not for Outdoor use or UV Light Applications

Download

ACI Thermistor n Duct Without Box_DpstarGroup

Reviews

There are no reviews yet.

Be the first to review “ACI Thermistor Duct Without Box”

Your email address will not be published. Required fields are marked *

Related products