Circuit |
Custom one-chip of microprocessor LSI circuit |
Display |
• LCD Size : 81.4 X 61 mm ( 3.2 X 2.4 inch )
• Dot Matrix LCD (320 X 240 pixels ) with back light |
Measurement |
• ACV
• ACA
• AC WATT ( True Power )
• AC WATT( Apparent Power )
• AC WATT( Reactive Power )
• Power factor
• Phase angle
• Frequency |
Wire connections |
1P/2W, 1P/3W, 3P/3W, 3P/4W. |
Voltage ranges |
10 ACV to 600 ACV, auto range. |
Current probe input signal and range |
• Current probe input signal volage ( ACV ) :
200mV/300mV/500mV/1V/2V/3V.• Current probe input current range ( ACA ) :
20 A/200A/2000A (1200 A)/30A/300A/3000A• Meter can cooperate the universal current probe. |
Safety standard |
IEC1010 CAT III 600 V. |
ACV input impedance |
10 Mega ohms. |
Range select |
ACV : Auto range.
ACA : Manual range. |
Clamp frequency response |
40 Hz to 1 KHz. |
Spec. tested frequency |
45 to 65 Hz |
Over load protection |
• ACV : 720 ACV rms
• ACA : 1300 ACA with clamp probe
* For the Clamp ,CP-1201 |
Over Indicator |
• LCD display show ” OL “.
• The data save into the SD card will show ” 9999 ” or ” 999 ”
( overleap the decimal point ). |
Under Indicator |
• LCD display show ” UR “.
• The data save into the SD card will show ” 9999 ” or ” 999 ”
( overleap the decimal point ). |
Data Hold |
Freeze the display reading. |
Data Record |
SD Card Record. |
Sampling Time |
Approx. 1 second. |
Power ON/OFF |
Manual OFF by push button |
Real time data logger |
• Real time data logger, saved the data into SD memory card and down load the all the measured value with the time information ( year/month/data/ hour/mimute/second ) down load to the Excel
• Integration time for data logger : 2 seconds to 7200 seconds, the during of setting step are 2 seconds. |
Data Output USB/RS232
* Computer interface |
RS232 computer serial interface :
• Connect the optional USB cable
USB-01 will get the USB plug.
• Connect the optional RS232 cable
UPCB-02 will get the RS232 |
Operating Temperature |
0 to 50 °C( 0 to 122 °F ). |
Operating Humidity |
Less than 80% R.H.. |
Power Supply |
• DC 1.5V, AA ( UM-3 ) Battery X 8 PCs (Alkaline or heavy duty battery).
• AC to DC 9V power adapter. |
Power Consumption |
• Meter : 300 DCmA
• Clamp : 34 DCmA. |
Clamp max. conductor Size |
50 mm ( 2.0 inch ) Dia.
* For the Clamp ,CP-1201 |
Weight |
• Meter: 948g ( includes batteries )
• Clamp ( includded cable ) : 467g |
Dimension |
• Meter :
225 X 125 X 64 mm
( 8.86 X 4.92 X 2.52 inch )• Clamp :
210 X 64 X 33mm
( 8.3 X 2.5 X 1.3 inch )• Clamp Jaw :
86 mm (3.4 inch)- outside |
Accessories Included |
• Instruction manual………………….. 1 PC
• Test Leads (TL88-4AT)…………. 1 Set (4 PCs)
• Alligator clips (TL88-4AC)……….1 Set (4 PCs)
• Clamp Probe ( CP-1201 )……..3 PCs
• AC to DC 9V adapter……………..1 PC
• SD card ( 2 G )……………………… 1 PC
• Carrying bag………………………….1 PC |
Optional Accessories |
• 2000 Amp current probe, CP-2000
• 200 Amp current probe, CP-200
• Flexible 3000 Amp current probe, CP-3000
• USB Cable , USB-01
• RS232 cable, UPCB-02
• Data Acquisition software, SW-U811 |
Reviews
There are no reviews yet.