ENVIRONMENTAL CONDITIONS |
Operating temperature |
-40°C to +85°C |
Storage temperature |
-40°C to +85°C |
Calibration temperature |
20…28°C |
Relative humidity |
< 95% RH (non-cond.) |
Protection degree |
IP20 |
MECHANICAL SPECIFICATIONS |
Dimensions (HxWxD) |
109 x 23.5 x 104 mm |
Weight (1 / 2 channels) |
150 / 200 g |
DIN rail type |
DIN EN 60715/35 mm |
Wire size |
0.13…2.08 mm2 AWG 26…14 stranded wire |
Screw terminal torque |
0.5 Nm |
COMMON SPECIFICATIONS |
Supply |
|
Supply voltage |
8.0…30 VDC |
Internal power dissipation, 1 / 2 ch. |
19 mW…0.7 / 1.4 W |
Isolation voltage |
|
Isolation voltage, test / working |
1.5 kVAC / 50 VAC |
Response time |
|
Response time (programmable) |
1…60 s |
Voltage drop |
8.0 VDC |
Programming |
Loop Link & HART |
Accuracy |
Better than 0.05% of selected range |
Signal / noise ratio |
> 60 dB |
EMC immunity influence |
< ±0.1% of span |
Extended EMC immunity: NAMUR NE21, A criterion, burst |
< ±1% of span |
INPUT SPECIFICATIONS |
Common input specifications |
|
Max. offset |
50% of selected max. value |
RTD input |
|
RTD type |
Pt50/100/200/500/1000; Ni50/100/120/1000 |
Cable resistance per wire |
5 Ω (up to 50 Ω per wire is possible with reduced measurement accuracy) |
Sensor current |
Nom. 0.2 mA |
Linear resistance input |
|
Linear resistance min….max. |
0 Ω…7000 Ω |
TC input |
|
Thermocouple type |
B, E, J, K, L, N, R, S, T, U, W3, W5 |
Cold junction compensation (CJC) |
Constant, internal or external via a Pt100 or Ni100 sensor |
Voltage input |
|
Measurement range |
-800…+800 mV |
Min. measurement range (span) |
2.5 mV |
Input resistance |
10 MΩ |
OUTPUT SPECIFICATIONS |
Current output |
|
Signal range |
4…20 mA |
Min. signal range |
16 mA |
Load (@ current output) |
≤ (Vsupply – 8) / 0.023 [Ω] |
Sensor error indication |
Programmable 3.5…23 mA |
NAMUR NE43 Upscale/Downscale |
23 mA / 3.5 mA |
Common output specifications |
|
Updating time |
440 ms |
HART protocol revisions |
HART 7 and HART 5 |
OBSERVED AUTHORITY REQUIREMENTS |
EMC |
2014/30/EU |
ATEX |
2014/34/EU |
RoHS |
2011/65/EU |
EAC |
TR-CU 020/2011 |
EAC Ex |
TR-CU 012/2011 |
APPROVALS |
ATEX |
KEMA 09ATEX0148 X |
IECEx |
DEK 11.0084X |
CSA |
1125003 |
FM |
FM17US0013X |
EAC Ex |
RU C-DK.HA65.B.00355/19 |
SIL |
Hardware assessed for use in SIL applications |
Reviews
There are no reviews yet.