ACI SLD Spot Leak Detector

Features

  • Recognize the presence of conductive fluids at a single point.
  • Ideal for drip pans, floor drains, and contained spaces.
  • Connect quickly to any controller that accepts a dry contact.
  • Can be screwed, or ram set to a floor or baseboard.
  • No exposed metal sensing posts and a small footprint/enclosure.
  • Probe height can be adjusted from 0” to 0.19”(0mm – 4.8mm).
  • Spacers can be added under the spot detector’s mounting holes if additional height is required to prevent false alarms.
Enquiry
Category:

Automation Components, Inc. (ACI) creates, manufactures, and distributes building automation sensors for the heating, ventilation, and air conditioning (HVAC) Industry. Dpstar is ACI Authorised Distributor in Malaysia. Our product lines include Temperature Sensors, Relative Humidity Sensors, Current Sensors, Pressure Sensors, Gas Sensors, and Wireless Sensors.

ACI’s spot leak detectors recognize the presence of conductive fluids at a single point and are ideal for drip pans, floor drains, and contained spaces. ACI’s leak detectors connect quickly to any controller that accepts a dry contact. The detectors can be screwed, or ram set to a floor or baseboard. Potted electronics ensure nothing within the sensor will rust or corrode, and the unit will continue to function when submerged in water. Other key features include no exposed metal sensing posts and a small footprint/enclosure. The sensor probe height can be adjusted from 0” to 0.19”(0mm – 4.8mm). Spacers can be added under the spot detector’s mounting holes if additional height is required to prevent false alarms.

Dimension

Applications

  • AHU Drip Pans
  • Floor drains
  • Contained Spaces

The A/SLD is covered by ACI’s Two (2) Year Limited Warranty.

Specification

Supply Voltage 24 VAC or 24VDC (+/- 10%)
Note: If a DC power supply is used, the A/SLD will be a latching device (once an alarm is
detected, the spot detector will remain in an alarm state until power is cycled to the A/SLD)
Supply Current 0.1 Amp Maximum
Relay Output Type SPDT (Form C) Dry Contacts
Relay Contact Rating 1A @ 24VDC, 0.5A resistive @ 120VAC
Wire Lead Length (Non-sensing) 14’ (4.27m)
Operating Temperature Range 32 to 122F (0 to 50C)
Operating Relative Humidity Range 5% to 95% non-condensing
Operating Altitude 15,000ft (4,752m) Maximum
Storage Temperature -4 to 158F (-20 to 70C)
Product Dimensions(L x W x D)  2.0”(50.8mm) x 1.55”(39.4mm) x 1.0”(25.4mm)
Product Weight 0.438 lbs (0.199 kg)
Agency Approvals CE; ETL listed: conforms to UL 61010-1, EN 61010-1; RoHS compliant

Download

ACI SLD Spot Leak Detector_DpstarGroup

Reviews

There are no reviews yet.

Be the first to review “ACI SLD Spot Leak Detector”

Your email address will not be published. Required fields are marked *