Veris H931 Current Transducer

Features

  • Loop powered analog current transducer with integral start/stop command relay
  • Reduces the number of installed components, saves time and space
  • Self-gripping, split-core design for fast retrofit installation, no need to remove conductor
  • Reduces installation charges – one device to install for start/stop and status
  • Fewer wires – power the current sensor and receive the 4 to 20 mA signal with only two wires
  • Selectable factory calibrated ranges up to 120 A for increased flexibility and resolution
  • 30 mA at 12 to 30 VDC sensor power
Enquiry

Veris Industries is an energy and environmental sensor partner that provides quality products for commercial HVAC and other automation applications. We offer complete lines of reliable, long-lasting innovative power monitoring products.

The Hawkeye H931 provides accurate load trending information with a proportional 4 to 20 mA output signal. These devices offer three amperage ranges for versatility, with easy slide-switch selection. The command relay is fully integrated in the device, but it is isolated from the current transducer. This combination makes these products ideal for start/stop control and status monitoring of motors, using one device instead of two.

Dimensional Drawing


Wiring Diagram

Applications

  • Load trending
  • Motor control
  • Positive proof of flow

Specification

Model H931
Application Building Automation Systems
Current Measurement Accuracy  ±2% of F.S. above 10% of F.S
Current Measurement Range 0 – 30 A | 0 – 60 A | 0 – 120 A
Current Sensor type Current Transducer, AC
Electrical Wiring Size  24 – 14 AWG (0.2 – 2.1 mm²)
Measurement Type  AC Current
Monitored Frequency Range 50 – 60 Hz
Monitored Wire Size 0.8″ (21 mm)
Mounting Split Core
Operating Humidity 10 – 90% RH, non-condensing
Operating Temperature 5 – 140 °F (-15 – 60 °C)
Output Specifications 4 – 20 mA
Outputs Analog output | Relay
Product Certification UL | CE
Product Type Sensor
Range HX31 Series
Relay Coil Voltage 24 VAC/DC
Relay Construction    Mechanical
Relay Contact Ratings Resistive: 5 A @ 250 VAC | Resistive: 5 A @ 30 VDC | Inductive: 2 A @ 250 VAC | Inductive: 2 A @ 30 VDC
Relay Poles/Throw SPST
Warranty 5 years

Download

Veris-H931-Current Transducer_DpstarGroup

Reviews

There are no reviews yet.

Be the first to review “Veris H931 Current Transducer”

Your email address will not be published. Required fields are marked *