Screw Clamp Terminal Blocks – Stud / Bolt – Connectwell STH4DT

Feature

Stud Type Terminal Block

These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block. The fastening nut always remains captive in the hinged plastic carrier. The Hinged Carrier should be lifted to insert the lugs and then snapped back into position. The nut can then be fastened to complete the connection. By the virtue of the hinged design the Terminal Blocks apart from shrouding the live parts, providing IP20 protection, saves considerable time in wiring. STH4DT Disconnect & Test Terminal Block is used for measuring, control and regulatory circuits. They provide a clear functional advantage for devices having utility instruments and associated transformers. Seperate testing points facilitate insertion of test probes. Disconnection is achieved by means of slide link operated with a screwdriver.

 

Enquiry
Category:
Love0
Stud Type Terminal Block

These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block. The fastening nut always remains captive in the hinged plastic carrier. The Hinged Carrier should be lifted to insert the lugs and then snapped back into position. The nut can then be fastened to complete the connection. By the virtue of the hinged design the Terminal Blocks apart from shrouding the live parts, providing IP20 protection, saves considerable time in wiring. STH4DT Disconnect & Test Terminal Block is used for measuring, control and regulatory circuits. They provide a clear functional advantage for devices having utility instruments and associated transformers. Seperate testing points facilitate insertion of test probes. Disconnection is achieved by means of slide link operated with a screwdriver.

Specification

 

TECHNICAL DATA

Rated Voltage 1000 V
Rated Current 41 A
Tightening Torque 1.2 Nm
Housing Material Polyamide
Product Function Feed Through
Wire Entry Orientation Side Entry
Mounting Possibility DIN 32/DIN 35/DIN 35-15 Rail
Stud Size M4
Operated by Screwdriver
Rated Surge Voltage 8 KV
Pollution Degree 3

CONNECTION DATA

Conductor Cross Section Stranded min. 1.5 mm²
Conductor Cross Section Stranded max. 6 mm²
Conductor Cross Section AWG/Kcmil min 22 AWG
Conductor Cross Section AWG/Kcmil max 8 AWG
2 Conductors with same Cross Section Stranded min 1.5 mm²
2 Conductor with same Cross Section Stranded max 6 mm²
Conductor Cross Section Solid min 1.5 mm²
Conductor Cross Section Solid max 6 mm²

DIMENSIONS

Height with DIN 32 rail 56.4 mm
Height with DIN 35 x 15 mm rail 59 mm
Height with DIN 35 x 7.5 mm rail 52.2 mm
Length 86 mm
Width (Thickness) 11 mm

Ordering Code

CAT. NO. DESCRIPTION STD. PACK
STH4DT 6 Sq.mm Hinge Type Disconnect and Test Terminal Block in Grey Colour 50
STH4DTBU 6 Sq.mm Hinge Type Disconnect and Test Terminal Block in Blue Colour 50
STH4DTR 6 Sq.mm Hinge Type Disconnect and Test Terminal Block in Red Colour 50
STH4DTY 6 Sq.mm Hinge Type Disconnect and Test Terminal Block in Yellow Colour 50
STH4DTBK 6 Sq.mm Hinge Type Disconnect and Test Terminal Block in Black Colour 50

 

Download

Connectwell STH4DT StudBolt Clamps Screw Clamp Terminal Blocks-DpstarGroup

Reviews

There are no reviews yet.

Be the first to review “Screw Clamp Terminal Blocks – Stud / Bolt – Connectwell STH4DT”

Your email address will not be published. Required fields are marked *

Related products