Square Type Proximity Sensor – Hanyoung Nux UP

Features

  • Applied exclusive IC for C-MOS
  • Wides range of power supply voltage(5-35 V DC:DC 3 wire type)
  • Internal noise enhanced circuit
  • Applied the 2 wire type proximity none polarity
Enquiry
Category:

Square Type Proximity Sensor
Model : UP

  • Applied exclusive IC for C-MOS
  • Wides range of power supply voltage(5-35 V DC:DC 3 wire type)
  • Internal noise enhanced circuit
  • Applied the 2 wire type proximity none polarity

Specification

Inductive D.C 3 wire type

Model NPN UP18S-5N UP18S-8N UP25S-5N UP25S-8N UP25S-12N UP30S-10N UP30S-15N UP40S-20N
PNP UP18S-5P UP18S-8P UP-25S5P UP25S-8P UP25S-12P UP30S-10P UP30S-15P UP40S-20P
Size Side length 18mm Side length 25mm Side length 30mm Side length 40mm
Standard sensing object (mm) Iron 18X18X1 Iron 25X25X1 Iron 25X25X1 Iron 30X30X1 Iron 35X35X1 Iron 30X30X1 Iron 45X45X1 Iron 60X60X1
Sensing distance 5 mm 8 mm 5 mm 8 mm 12 mm 10 mm 15 mm 20 mm
Setting distance 0~4.0 mm 0~6.4 mm 0~4.0 mm 0~6.4 mm 0~9.6 mm 0~8.0 mm 0~12.0 mm 0~16.0 mm
Hysteresis Less than 10% of sensing distance
ponse frequency 500 Hz 350 Hz 500 Hz 350 Hz 250 Hz 300 Hz 200 Hz 150 Hz
Power supply voltage 12~24 V d.c (Usable voltage range 5 – 35 V d.c)
Control output Open/Close capacitance 200 mA Max. (Resistive load)
Residual voltage Max 1.5 V
Current consumption Max 6 mA
Operation indication Red LED
Protective circuit Power reversely connected protective circuit, Surge protective circuit and over current protective
Degree of protection IP 67 (IEC standard)
Connection structure Cable type (standard cable length 2m), Relay connector type
Material Case : PBT resin, Cable holder : Polyester elastomer
Weight Cable type approx. 60g approx. 60g approx. 80g approx. 80g approx. 80g approx. 90g approx. 90g approx. 110g
Relay connector type approx. 20g approx. 20g approx. 40g approx. 40g approx. 40g approx.60g approx. 60g approx. 80g

Inductive D.C 2 wire type

Model NPN UP18S-5T
UP18S-8T
UP25S-5T
UP25S-8T
UP25S-12T
UP30S-10T
UP30S-15T
UP40S-20T
PNP UP18S-5U
UP18S-8U
UP25S-5U
UP25S-8U
UP25S-12U
UP30S-10U
UP30S-15U
UP40S-20U
Size Side length 18 mm Side length 25mm Side length 30mm Side length 40mm
Standard sensing object (mm) Iron 18X18X1 Iron
25X25X1
Iron 25X25X1 Iron 30X30X1 Iron
35X35X1
Iron
30X30X1
Iron
45X45X1
Iron 50X50X1
Sensing distance 5 mm 8 mm 5 mm 8 mm 12 mm 10 mm 15 mm 20 mm
Setting distance 0~4.0 mm 0~6.4 mm 0~4.0 mm 0~6.4 mm 0~9.6 mm 0~8.0 mm 0~12.0 mm 0~16.0 mm
Hysteresis Less than 10% of sensing distance
ponse frequency 500 Hz 350 Hz 500 Hz 350 Hz 250 Hz 300 Hz 200 Hz 150 Hz
Power supply voltage 12 – 24 V d.c (Usable voltage range 5 – 30 V d.c)
Control output Open/Close capacitance 100 mA Max. (Resistive load)
Residual voltage T(Polarity) : max 3.5 V, U(No polarity) : max 5 V
Current consumption Max 1 mA
Operation indication Red LED
Protective circuit Power reversely connected protective circuit, Surge protective circuit and over current protective
Degree of protection IP 67 (IEC standard)
Connection structure Cable type (standard cable length 2m), Relay connector type
Material Case : PBT resin, Cable holder : Polyester elastomer
Weight Cable type approx. 60g approx. 60g approx. 80g approx. 80g approx. 80g approx. 90g approx. 90g approx. 110g
Relay connector type approx. 20g approx. 20g approx. 40g approx. 40g approx. 40g approx. 60g approx. 60g approx. 80g

Inductive A.C 2 wire type

Model For A.C UP25S-5A UP25S-8A UP25S-12A UP30S-10A UP30S-15A UP40S-20A
Size Side length 25 mm Side length 30 mm Side length 40mm
Standard sensing object (mm) Iron 25X25X1 Iron 30X30X1 Iron 35X35X1 Iron 40X40X1 Iron 50X50X1 Iron 60X60X1
Sensing distance 5 mm 8 mm 12 mm 10 mm 15 mm 20 mm
Setting distance 0~4.0 mm 0~6.4 mm 0~9.6 mm 0~8.0 mm 0~12.0 mm 0~16.0 mm
Hysteresis Less than 10% of sensing distance
ponse frequency 20 Hz
Power supply voltage 100~240 V a.c (Usable voltage range 90 – 250 V d.c)
Control output 200 mA Max. (Resistive load)
Residual voltage Max 10 V a.c
Leakage current Max 2.2 mA
Operation indication Red LED
Protective circuit Surge protective circuit is built in.
Degree of protection IP 67(IEC standard)
Connection structure Cable type (standard cable length 2m), Relay connector type
Material Case : PBT resin, Cable holder : Polyester elastomer
Weight Cable type approx. 80g approx. 80g approx. 80g approx. 90g approx. 90g approx. 110g
Relay connector type approx. 40g approx. 40g approx. 40g approx. 60g approx. 60g approx. 80g

Ordering Code

Model Code Information
UP S- inductive type proximity sensor
Sensing area size 12 12 X 12 mm
18 18 X 18 mm
25 25 X 25 mm
30 30 X 30 mm
40 40 X 40 mm
Structure type S Square type
Sensing distance 4 4 mm(Only with UP12S-4)
5 5 mm(Only with UP18S-5, UP25S-5)
8 8 mm(Only with UP18S-8, UP25S-8)
10 10mm (Only with UP30S-10)
12 12mm (Only with UP25S-12)
15 15mm (Only with UP30S-15)
20 20mm (Only with UP40S-20)
Power and Output type N D.C NPN output
P D.C PNP output
A A.C 2 wire type(But UP18S is excluded)
T D.C 2 wire type(Polarity)
U D.C 2 wire type (No polarity)
Output state A Normal open(N.O)
C Normal close(N.C)
Sensing direction * No indication (Detect Front side)
U Detect upper side
(Only available with the square type UP18S)
Connection structure * No indication (Cable type)
CR Relay connector type

Download

Hanyoung Nux UP – Square Type Proximity Sensor-DpstarGroup

Reviews

There are no reviews yet.

Be the first to review “Square Type Proximity Sensor – Hanyoung Nux UP”

Your email address will not be published. Required fields are marked *