Flat Type Proximity Sensor – Hanyoung Nux UP

Features

  • Applied exclusive IC for C-MOS
  • Wide range of power supply voltage(5-35 V DC : DC 3 wire type)
  • Internal noise enhanced circuit
  • Applied the 2 wire type proximity none polarity
  • Able to install at metal surface directly Sensing distance 8m, thickness 10.5mm Flat type
Enquiry
Category:

Flat Type Proximity Sensor
Model : UP

  • Applied exclusive IC for C-MOS
  • Wide range of power supply voltage(5-35 V DC : DC 3 wire type)
  • Internal noise enhanced circuit
  • Applied the 2 wire type proximity none polarity
  • Able to install at metal surface directly Sensing distance 8m, thickness 10.5mm Flat type

Specification

Inductive D.C 3 wire type/2 wire type

Model D.C 3 wire type D.C 2 wire type
NPN UP25F-8N Polarity UP25F-8T
PNP UP25F-8P No Polarity UP25F-8U
Size 25 X 49 Flat type 25 X 49 Flat type
Standard sensing object(㎜) Iron 25 X 25 X 1
Sensing distance 8 mm
Setting distance 0 ~ 6.4mm
Hysteresis Less than 10% of sensing distance
Response frequency 200 Hz
Power supply voltage 12 – 24 V a.c
(Usable voltage range 5 – 35 V d.c)
12 – 24 V a.c
(Usable voltage range 10 – 30 V d.c)
Control output Open/Close capacitance 200 mA max (Resistive load) 100 mA max (Resistive load)
Residual voltage Max 1.5 V Polarity : max 3.5 V, No polarity : max 5 V
Current consumption Max 6 mA
Leakage current Max 1 mA
Operation indication Red LED
Protective circuit Power reversely connected protective circuit,
Surge protective circuit and over current protective circuit are built in.
Degree of protection IP67 (IECstandard)
Connection structure Cable type(Standard cable length 2m), Relay connector type
Material Case : PBT resin, Cable holder : Polyester elastomer
Weight Cable type approx. 60g approx. 60g
Relay connector type approx. 20g approx. 20g

Inductive A.C 2 wire type

Model UP25F-8A
Standard sensing object(㎜) Iron 25 x 25 x 1
Sensing distance 8 mm
Setting distance 0 ~ 6.4mm
Hysteresis Less than 10% of sensing distance
Response frequency 20 Hz
Power supply voltage 100 – 240 V a.c (Usable voltage range 90 – 250 V a.c )
Control output Open/Close capacitance 200 mA max (Resistive load)
Residual voltage Max 10 Va.c
Leakage current Max 2.2 mA
Operation indication Red LED
Protective circuit Surge protective circuit built in.
Degree of protection IP67 (IEC standard)
Connection structure Cable type(Standard cable length 2m), Relay connector type
Material Case : PBT resin, Cable holder : Polyester elastomer
Weight Cable type approx. 60g
Relay connector type approx. 20g

Ordering Code

 Model Code Information
UP 25 F- 8 inductive type proximity sensor
Sensing area size 25 please refer to the dimension (25 x 49 x 10 mm)
Structure type F Flat type
Sensing distance 8 8 mm
Power and Output type N D.C NPN output
P D.C PNP output
A A.C 2 wire type
T D.C 2 wire type(Polarity)
U D.C 2 wire type (No polarity)
Output state A Normal open(N.O)
C Normal close(N.C)
Connection structure * No indication (Cable type)
CR Relay connector

Download

Hanyoung Nux UP – Flat Type Proximity Sensor-DpstarGroup

Reviews

There are no reviews yet.

Be the first to review “Flat Type Proximity Sensor – Hanyoung Nux UP”

Your email address will not be published. Required fields are marked *