Loop-Powered LCD Indicator – PR Electronics 5531B

Features

  • 4 digit 1/8 DIN (48 x 96 mm) loop-powered LCD display
  • Easy push-button configuration
  • Backlit LCD display is readable in low light conditions
  • Display can be mounted in the safe area or in I.S. / Ex zone
Enquiry
Category:

Application

  • The 5531 indicator is powered by the 4 to 20 mA current loop and is easily scaled to display the correct process value.
  • Because it does not require separate power wiring, the 5531 is perfect for remote display of process loops.
  • The 5531B can be mounted in Ex Zone 1.
  • The 5531B1 Ex display includes the 8501 enclosure and can be mounted in Ex Zone 2 or 22 (gas or dust).
  • The 5531B2 includes the 8501 enclosure and can be mounted in Ex Zone 1, 2, 21 or 22 (gas or dust).

Technical characteristics

  • With a full measurement range of 3.6 to 23 mA, the 5531 is NAMUR NE43 compliant.
  • The display can be push-button scaled to any range between -9999 to 9999, and reverse display action is possible.
  • The LCD backlight can be set to half or full intensity for easy viewing in low light conditions.
  • The display only requires 1.5 VDC, (75 Ω loop load), with the backlight turned off.
  • The input is HART transparent.
  • The front push-buttons can be disabled to prevent unauthorized adjustment.

Mounting / installation

  • Once panel mounted with the included gasket, the 5531 provides IP65 ingress protection.

Specification

ENVIRONMENTAL CONDITIONS
Operating temperature -20°C to +60°C
Storage temperature -20°C to +60°C
Calibration temperature 20…28°C
Relative humidity < 95% RH (non-cond.)
Protection degree IP65, from front
MECHANICAL SPECIFICATIONS
Dimensions (HxWxD) 48 x 96 x 120 mm
Cut out dimensions 44.5 x 91.5 mm
Weight approx. 200 g
Cable glands and cable diameter M16 x 1.5 / Ø 5…8 mm
Wire size, connector terminal 1 – 4 0.13…2.08 mm2 / AWG 26…14 stranded wire
COMMON SPECIFICATIONS
Supply
Supply voltage Input loop-powered
Response time
Response time (0…90%, 100…10%) < 1 s
EMC immunity influence < ±0.5% of span
Signal / noise ratio > 60 dB
Updating time 500 ms
INPUT SPECIFICATIONS
Current input
Measurement range 3.6…23 mA
Loop error detection, 4…20 mA: Low ~ < 3 mA
Loop error detection, 4…20 mA: High ~ > 24 mA
Input voltage drop, without backlight < 1.5 V @ 20 mA
Input voltage drop, with full backlight < 10.5 V @ 20 mA
OUTPUT SPECIFICATIONS
Display
Display readout ± 9999 (4 digits)
Digit height 16 mm
OBSERVED AUTHORITY REQUIREMENTS
EMC 2014/30/EU
EAC TR-CU 020/2011
APPROVALS
ATEX KEMA 05ATEX1044 X (5531A/B1) KEMA 05ATEX1105 X (5531B/B2)
EAC Ex RU C-DK.HA65.B.00355/19

Download

PR Electronics 5531B Loop-Powered LCD Indicator-DpstarGroup

Reviews

There are no reviews yet.

Be the first to review “Loop-Powered LCD Indicator – PR Electronics 5531B”

Your email address will not be published. Required fields are marked *